Číslo výrobku
{{item.ItemCode}}
Upravit adresu
{{item.ItemVariation.EANCode ? item.ItemVariation.EANCode : item.EANCode}}
procento DPH
{{item.VATPercentage}}%
Značka
{{item.ItemBrandDescription}}
Kód kurýra položky
{{item.ItemSupplierCode}}
Velikost balení
{{item.PackSize}}
Suitable for food production
No
Min. Fe-particle size that can be caught
0,03 mm
Production stop required during ferrous particles disposal
Yes
Cleaning (ferrous particles disposal) method
Automatic
Ferrous particles disposal via
Pneumatically moving to and cleaning magnets in side channel
Product inlet size
#400 mm
Product outlet size
#400 mm
Interface connection type/size
Rectangular flanges with hole pattern acc. to drawing
Pneumatic connection
For 6 mm hose
Electrical connection
To control unit
Materials in contact with product
AISI304 (SS 1.4301) / AISI316L (SS 1.4404)
Material seal ring rotor disc
NBR RST, 70° Shore A
Material seal ring rotor shaft
NBR RST, 70° Shore A
Surface finishing (interior/exterior)
S1: Grit blasted, Ra 3 µm
Extra wear-resistant coating
No
Welds inside the product channel
WH: Continuously welded
Welds outside the product channel
WH: Welded shut
Max. operating temperature
60 °C
Max. operating temperature in ATEX environment
40 °C
Min./max. ambient temperature
-5 to 40 °C
Suited for use in ATEX zone
22
Magnetic system
Magnetic bar in tube
Magnet quality
Neodymium N-42
Magnetic bars position / behaviour during production
Rotating, magnetic bars placed in a rotor
Number of magnetic bars
12
Flux density on magnet tube in contact with product (±10%)
9400 gauss
Control unit power supply
3x400 V AC + N + PE; 50 Hz
Pneumatic supply magnetic bars
4 - 6 bar
Motor drive
SEW electro motor with gear box
Motor current
1,82 (Δ) / 1,05 (Y) A
Motor voltage
230 (Δ) / 400 (Y) V AC
Motor rotational speed (out)
6 rpm
Motor dust/water protection class
IP65
Control
PLC Siemens LOGO! logic Module (included)
Including integrated valve box for Fe-particles disposal
No
Incl. all bars magnet in/out sensoring
No